Post Your Comments Here!

Hi!

Share with us!

Post Your comments, stories and feedback here!

We’d like to here from you.

Mark

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • StumbleUpon
  • Technorati
  • TwitThis
  • Yahoo! Buzz

{ 4 comments… read them below or add one }

Bobby McDowel April 9, 2009 at 8:53 pm

What great products! I purchased some saddlebags for my Fatboy and they are just incredible – This is also a great website! Lots of good information that is fresh.

Thanks again for the great bags! I will keep you bookmarked!

Bobby

Mark May 3, 2009 at 5:46 am

Thanks for the Great comments Bobby, Please tell your friends about our website. Let us know how we can improve.

Mark
Owner – Saddlebagworld.com

John Cashion August 17, 2009 at 8:31 pm

I bought the turn signal relocation kit. The video was helpful for installation. I opted to solder the lead for the signals instead of removing the pins from the connector. Destroy a connector then you really have a problem obtaining one or two. It would be a great idea to include two crimp type tubular connectors instead of trusting solder. Solder, if not applied correctly can fail after some time. That is if the soldering is not done right. The solder joint should look very shiny not dull. When it is shiny you can trust that all of the twisted wires have good coating. Go under the twisted wires after the iron is hot hot. Add some solder to the tip first. The tip placed under and solder applied to the top of the twisted wires. It will run down to the iron and make a shiny good solid connection. Good product and good support.

John Cashion August 19, 2009 at 5:17 pm

Love the slanted bags. Reinforced from the inside to keep them from sagging or losing the shape.
I used your supports as well. Did not use the spacers as It would have placed the bags too far away from the fenders and have a more visible
gap. To keep the right hand bag from coming near the belt pulley I bought a length of the foam water pipe insulation , The tubular type. Cut a piece the length of the lower horizontal support. 2006 XL883-Low. Thanks

Leave a Comment